Sales hotline:13775032303
Specification
- Cells Per Unit: 1
- Voltage Per Unit: 2 V
- Capacity: 1200 Ah @ 100hr-rate to 1.80V per cell @ 25°C (77°F)
- Weight: Approximately 73.8 Kg (162.7 lbs)
- Maximum Discharge Current: 6000A (5sec)
- Internal Resistance: Approximately 0.36 mΩ
- Operating Temperature Range:
- Discharge: -20℃~50℃ (-4°F~122°F)
- Charge: 0℃~40℃ (32°F~104°F)
- Storage: -20℃~40℃ (-4°F~104°F)
- Nominal Operating Temperature Range: 25℃±3℃ (77°F±5°F)
- Float Charging Voltage: N/A
- Recommended Maximum Charging Current Limit: 84A (multi-steps) / 168A (CC-CV) is recommended, not to exceed 200A
- Equalization Charging Voltage: N/A
- Self Discharge: Less than 10% after 90 days, can be stored up to 6 months at 25℃ (77℉)
- Terminal: I3 thread copper alloy terminal to accept M10 bolt
RE Series
RE 1200
General: Designed for Renewable Daily Storage & Power Fluctuation Control Applications
【Design Life】
2700 cycles @ 70% Depth of Discharge (DOD) at 25℃
3800 cycles @ 50% DOD at 25℃
5900 cycles @ 30% DOD at 25℃
【Operating Temperature Range】
Nominal Operating Temperature: 25℃ (77℉)
Discharge: -20℃ to 50℃ (-4℉ to 122℉)
Charge: 0℃ to 40℃ (32℉ to 104℉)
Storage: -20℃ to 40℃ (-4℉ to 104℉)
【Recommended Charge Conditions】
1. Daily energy storage
- 2.42+/-0.02 VDC/Unit at 25℃, current limit 0.07CA (84A) (CC-CV)
- 2.42+/-0.02 VDC/Unit at 25℃, current limit 0.07CA (84A) (Multi-step)
2. Power fluctuation control
- 2.42+/-0.02 VDC/Unit at 25℃, current limit 0.14CA (168A) (CC-CV)
【Self Discharge】
Less than 10% after 90 days, can be stored up to 6 months at 25℃ (77℉);
Fully recharging is required before usage, and charged sooner if stored at higher temperature than 25℃ (77℉).
Specification:
Nominal Voltage: 2V (single cell per unit)
Nominal Capacity: 1200 Ah @ 100hr-rate to 1.80V per cell @ 25℃ (77℉)
Weight: Approx. 73.8 Kg (162.7 lbs)
Maximum Discharge Current: 6,000 A (5sec)
Internal Resistance: Approx. 0.36 mΩ
Short Circuit Current: 11,400 A
Maximum Charge Current: 84A (multi-steps) / 168A (CC-CV) is recommended, not to exceed 200A
Terminal Types: I3 thread copper alloy terminal to accept M10 bolt
Terminal Tightening Torque: 249±50 Kgf∙cm / 216±43 Lbf∙in / 24.4±4.9 N∙m
Container Material: Flame Retardant Polypropylene (UL 94-V0)
Length (L): 303.0±3.0 mm (11.93±0.12 inch)
Width (W): 172.0±3.0 mm (6.77±0.12 inch)
Depth (D): 497.0±3.0 mm (19.57±0.12 inch)
Constant Current Discharge Characteristics (Unit: A, 25℃, 77℉):
F.V/Time 1H 2H 3H 4H 5H 8H 10H 12H 20H 24H 48H 100H
1.60V 508 295 219 180 155 106 87.6 75.3 49.4 42.5 24.0 12.6
1.67V 501 292 217 179 154 105 87.1 74.9 49.1 42.3 23.9 12.5
1.70V 495 291 216 178 153 104 86.8 74.7 49.0 42.1 23.8 12.4
1.75V 478 286 214 177 152 103 86.1 74.1 48.6 41.8 23.6 12.3
1.80V 447 277 210 173 149 102 84.8 72.9 47.9 41.2 23.3 12.2
Constant Power Discharge Characteristics (Unit: W, 25℃, 77℉):
F.V/Time 1H 2H 3H 4H 5H 8H 10H 12H 20H 24H 48H 100H
1.60V 972 555 418 347 299 201 169 146 96.6 83.2 47.2 25.1
1.67V 958 552 416 346 298 200 168 145 96.2 82.9 47.1 25.0
1.70V 948 550 415 345 297 199 167 144 96.0 82.7 47.0 24.9
1.75V 916 544 412 343 295 198 166 143 95.4 82.2 46.7 24.8
1.80V 856 528 404 338 290 196 164 142 94.2 81.2 46.1 24.5
0
Contact: Sir SHU
Phone: 13775032303
Tel: 4001177032
Email: 13775032303@139.com
Add: Room 3208, Floor 2, Rongyu Building, No. 780 Wanhangdu Road, Jing'an District, Shanghai