Over-discharge refers to the phenomenon that the battery is discharged to a voltage lower than the termination voltage. Over-discharge will have the following adverse effects on the battery:
Over-utilization of active materials, resulting in decreased battery capacity.
Generate too much or too much lead sulfate, destroy the PbO2 skeleton, causing fracture, or unable to be reduced during recharging, resulting in reduced capacity.
In severe cases, it can even cause short circuit and even explosion of the battery after over-discharge, so it should be avoided as much as possible.
Causes of over-discharge
The causes of over-discharge are as follows:
The battery is not fully charged before use.
The battery is used for a long time without being recharged.
The battery is used in a high-current environment.
Prevention of over-discharge
To prevent over-discharge, the following measures can be taken:
Fully charge the battery before use.
Do not use the battery for a long time without being recharged.
Use the battery in a low-current environment.
Use a battery with a over-discharge protection circuit.
How to deal with over-discharge
If the battery is over-discharged, the following measures can be taken:
Immediately stop using the battery.
Recharge the battery as soon as possible.
If the battery cannot be recharged, replace the battery.
Contact: Sir SHU
Phone: 13775032303
Tel: 4001177032
Email: 13775032303@139.com
Add: Room 3208, Floor 2, Rongyu Building, No. 780 Wanhangdu Road, Jing'an District, Shanghai